DC to AC Supply and Inverter Circuits

By | May 5, 2016

0-30V 20A High Power Supply with LM338 –  This is High current and Adjustable Volt 0 to 30V 20A. It easy circuit and nice circuit, Because use IC LM338 and IC 741. Volt Output adj by VR1-1K. IC LM338 to hold heat-sink.

300ma DC-to-AC Converter –  This circuit was used to provide battery backup to a device that had an AC (output) wall transformer. Due to  quasi-sine-wave output and imprecise 60Hz output frequency, some devices might not work properly. Peak output is  DC input voltage minus about 20 ohms drop. Use bigger output MOSFETS for more current output.  Designed by Andrew R. Morris

40A Power Supply Unit –  Capable of running at full power at 100% duty cycle.

500W low cost 12V to 220V inverter –  Using this circuit you can convert the 12V dc in to the 220V Ac. In this circuit 4047 is use to generate the square wave of 50hz and amplify the current and then amplify the voltage by using the step transformer.

555 DC-AC Inverter –  This DC-to-AC inverter schematic produces an AC output at line frequency and voltage. The 555 is configured as a low-frequency oscillator, tunable over the frequency range of 50 to 60 Hz by Frequency potentiometer R4.  The 555 feeds its output (amplified by Q1 and Q2) to the input of transformer T1, a reverse-connected filament.

6v to 12v Converter –  This inverter circuit can provide up to 800mA of 12V power from a 6V supply. For example, you could run 12V car accessories in a 6V (British?) car. The circuit is simple, about 75% efficient and quite useful. By changing just a few components, you can also modify it for different voltages.

AN14 Transistor Considerations for LCD Backlighting –  Zetec Semiconductors  Applications Notes A study of  parametric requirements of Bipolar transistors for  self-oscillating resonant “Royer” inverter with respect to LCD backlighting, including circuit behavior,  voltage ratings of most relevance to ensure optimized device selection, and compact packaging options.

High Power 12 V to 300 V Inverters for High Repeat rate medium Power Strobes: runs on12 V, at up to 6 A, and can fire the tubes at a rate of about 8-10 Times per second.

Tiny Tiny Inverter Design: little efficient circuit that runs off of3V, and charges up a little1 uf250-Volt cap all the way up in about30 seconds

Digital to Analog Centronics D / A & Filter:

DC to AC Inverter:

12 Volt DC to 120 Volt AC Inverter: This inverter should solve that problem. It takes12 VDC and steps it up to120 VAC. The-Wattage depends on which transistors you use for Q1 and Q2, as well as how “big” a transformer you use for T1. The inverter can be constructed to supply anywhere from1 to1000 (1 KW)-Watts.

Leave a Reply